|
Enforce standards
 Q/321011KLA203 TICW5-2009
Features and uses
This product is suitable for electrical instrument connection or signal transmission with AC rated voltage 450/750V and below for mobile or fixed installation. The cable has good thermal stability and can maintain good electrical performance and flexibility in high temperature and cold environments. It is suitable It is used in metallurgy, electric power, petrochemical and other industries with special requirements such as mobile temperature resistance and anti-corrosion.
Features
1. AC rated voltage: Uo/U450/750V
2. Maximum working temperature: 180℃
3. Minimum ambient temperature: silicone rubber sheath: -60°C for fixed installation, -20°C for non-fixed installation.
4. The temperature for cable installation and laying should not be lower than -25℃
5. The allowable bending radius of the cable: the minimum bending radius of the non-armored cable is 6 times the outer diameter of the cable.
Basic model and product name
| Model |
Product name |
| KGG |
Silicone rubber insulated and sheathed control cable
|
| KGGR |
Silicone rubber insulated and sheathed control flexible cable
|
| KGGP |
Silicone rubber insulated and sheathed copper wire braided shielded control cable
|
| KGGRP |
Silicone rubber insulated and sheathed copper wire braided shielded control flexible cable
|
| KGGRP1 |
Silicone rubber insulated and sheathed tinned braided shielded control flexible cable
|
Note: 1. If flame-retardant silicone rubber cable is required, add a flame-retardant logo before the model number.
2. The copper wire in the conductor core can be tinned.
Code name and meaning
| Project |
Codename |
Shuo Ming |
| Flame retardant properties |
Z (A, B, C) |
Flame-retardant silicone sheath
|
| Series code |
K |
Control cable
|
| Insulating materials |
G |
Silicone rubber
|
| Sheath material |
G |
Silicone rubber
|
| VF |
Nitrile polyvinyl chloride
|
| Shielding material |
P |
Copper wire braided shield
|
| P1 |
Tinned copper wire shielding
|
| Conductor structure |
A |
Single strand conductor
|
| B |
7 stranded conductor
|
| R |
Multiple stranded conductors
|
Main technical indicators
1. DC resistance of finished cable conductor (in compliance with GB3956 regulations).
2. The insulation resistance of the finished cable at 20℃ is not less than 1500MΩ·KM.
3. The finished cable cannot withstand AC 50Hz3.5kV/5min voltage test without wear.
|
